Highly specialized solution for PSA cars and other manufacturers with SIEMENS ECU's.
With the use of that tool you can gain full control of ECU's memories.
You can read-write eeprom, flash memories, read pincode, transfer ECU to "After Sales(virgin)" mode so ECU can be adapted to other car.
You can read-modify service history which contains DATE/MILEAGE/DIADEVID.
All operations are done through Kline or CAN bus without need to open ECU.
Reading and updating flash and configuration memory of ECUs: Siemens SID, EDC15, EDC16. Service list update.
With this special function you can read and and calibrate the mileage stored in the BSI module and remove the synchronization with the instrument cluster (i.e. The modification is performed in the BSI exclusively and after a complete ignition cycle the mileage is not restored to the original value). In the cases where the sync removal does not apply it can calibrate the mileage in the cluster exclusively. Supported models are all CAN and UDS protocol models which includes almost all models produced after 2004. This function can be used independently.
With this special function you can read PIN codes from the BSI module. Supported models are all CAN and UDS protocol models which includes almost all models produced after 2004